The Heidelberg Wallbox Energy Control 11 kW is the first wallbox from Heidelberg that offers local and dynamic load management. The charging current can be distributed to up to 16 wallboxes, so up to 16 hybrid or e-cars can be charged at the same time. The available electricity is automatically output to the individual wallboxes as required. This process is completely automatic. Each vehicle can be charged with up to 11 kW. As soon as a vehicle is fully charged, it will continue to be supplied with sufficient power if necessary, e.g. B. to be able to continue operating the air conditioning or auxiliary heating. When current is released, it is automatically distributed to the batteries of the other electric cars. The nominal current of the Heidelberg Wallbox Energy Control can be set from 6 to 16 amps.
Of course, there is a smart interaction between your photovoltaic system and Heidelberg Energy Control. You can connect the wallbox to your in-house Home Energy Management System (HEMS) and thus use your self-generated electricity, e.g. B. use the surplus electricity from the photovoltaic system to charge your electric car. The system only feeds as much solar power into the wallbox as is currently available. This enables a consumption-optimized feed-in of your self-produced electricity.
If you integrate the Heidelberg Wallbox Energy Control into your HEMS, you can also control the charging system via the Internet. Depending on the manufacturer, there may be various apps available for monitoring charging processes or cost management.
In addition, it is possible to protect the wallbox from unauthorized charging using an RFID reader or a key switch. Please note that this is not included in the scope of delivery.
You can see the status of the Heidelberg Wallbox Energy Control from the front lighting.
The wallbox with load management from Heidelberg is easy and convenient to use. The high-performance system guarantees fast charging of your electric vehicle. A safe and intelligent socket with an elegant design for your electric car. The already integrated fault current detection minimizes the installation costs.
The Heidelberg Wallbox Energy Control is the right charging solution for garages, apartment buildings as well as company and hotel parking lots.
- Intuitively operated charging station for e-vehicles
- Applicable in garages and carports
- Safe indoors and outdoors even in adverse weather conditions
- Intelligent charging technology MADE IN GERMANY. No follow-up costs due to maintenance-free operation
- Simple assembly by qualified electricians or installation service
- charging power adjustable up to 11 kw
- Reduced installation costs thanks to integrated residual current detection
- Intuitively operated, cost-effective plug-and-play solution
- Power-saving stand-by mode in idle mode
- Suitable for all electric and hybrid vehicles equipped with a type 2 charging socket according to IEC 62196-2
- Scope of delivery HEIDELBERG Wallbox Home Eco: Wallbox, 3.5 m charging cable with type 2 charging plug according to DIN EN 62196-2, operating and assembly instructions + safety instructions
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.